Standard tile sizes in Australia aren’t set by law, but a few formats dominate. For floors, 300x600mm and 600x600mm lead the market. Walls often use 300x600mm and 100x300mm subway tiles. Large tiles like 600x1200mm keep growing in popularity. Here’s what each size suits, how thick tiles run, and how we choose on Melbourne jobs.
What Are the Standard Tile Sizes in Australia?
No official standard exists. Manufacturers set the sizes, so you’ll see small differences between brands. Still, most tiles fall into three groups.
| Group | Common sizes (mm) | Where they work |
| Small | 50×50, 100×100, 100×300 subway | Shower floors, niches, splashbacks |
| Medium | 300×300, 300×600, 600×600 | Floors and walls |
| Large | 600×1200, 800×800, 1000×1000 | Living areas, feature walls |
Keep one thing in mind. Sizes on the box are “nominal”. A 300×600 tile may measure 297x597mm. Check the real size before you plan a layout.
Common Floor Tile Sizes: 300×600, 600×600 and 600×1200
Most homes use one of three floor sizes. Each has its place.
- 300x600mm: It’s easy to handle and cuts well around corners. Bathrooms and laundries suit it.
- 600x600mm: This is the classic. People often search for “60×60 tiles”, and the answer is simple. Each tile is 60cm by 60cm, or about 0.36 square metres.
- 600x1200mm: It gives fewer joints and a calm look. It works best in open areas.
Size is only half the choice, though. Material matters just as much. Our guide on how to choose the right floor tiles covers porcelain, ceramic and stone.
Common Wall and Splashback Tile Sizes
Walls give you more freedom, because tiles don’t carry foot traffic. Many people pick 300x600mm and fix it either way up. Others choose 100x300mm subway tiles for a classic look.
Splashbacks work well with smaller tiles. Mosaics bend around tight spaces, and subway tiles suit kitchens. Smaller tiles do mean more grout lines. That’s fine, but pick your grout with care. Epoxy grout resists stains better behind a cooktop, and our post on epoxy grout vs cement grout explains when it’s worth the extra cost.
Large Format Tile Sizes and What They Need From the Floor
Large tiles look great. They also show every flaw underneath. A dip of a few millimetres can leave one edge sitting higher than its neighbour. Tilers call this lippage.
So the floor matters more than the tile. Many manufacturers ask for a very flat surface, often within a few millimetres over two or three metres. Check the maker’s spec for your tile. If the slab or old floor isn’t flat enough, a screed fixes it. Our screeding service levels the base before any tile goes down.
A few other points help:
- Large tiles need full adhesive coverage, with no hollow spots.
- They break more easily during handling, so two people should carry them.
- Cutting waste usually runs higher. Plan for about 10%, and more with patterns.
Tile Sizes and Thickness: 8mm, 10mm and 20mm Outdoor Pavers
Thickness changes how a floor feels and fits. It can also affect door clearance. A 10mm tile plus adhesive adds roughly 15mm to your floor height, so measure your doors first.
| Tile type | Typical thickness |
| Wall tiles | 6mm to 10mm |
| Porcelain floor tiles | 8mm to 10mm |
| Thin large panels | 6mm to 12mm |
| Natural stone | 10mm to 20mm |
| Outdoor pavers | About 20mm |
Thicker tiles generally handle more weight. Outdoor pavers run around 20mm because they sit outside and take knocks. Always check the product sheet, since thickness varies by brand. For tiling methods, the Australian Standard AS 3958.1 guides how tiles get installed.
Best Tile Sizes for Bathrooms, Kitchens and Living Areas
Here’s where each size tends to work best. Rooms differ, so treat this as a starting point.
| Room | Floor size | Wall size |
| Bathroom | 300×600 or 600×600 | 300×600 |
| Kitchen | 600×600 | 100×300 or 300×600 |
| Living area | 600×600 or 600×1200 | Feature wall, any size |
| Laundry | 300×600 | 300×600 |
Bathrooms need extra thought. Shower floors slope towards the drain, so large tiles can be a problem there. Small tiles or mosaics follow the slope more easily. In the rest of the room, 300x600mm is a safe pick. Our list of the top 5 bathroom tile options shows styles that pair well with these sizes.
Kitchens handle 600x600mm well. It’s tough, easy to clean, and widely stocked.
Do Large Tile Sizes Make a Small Room Look Bigger?
Often, yes. Bigger tiles mean fewer grout lines, so your eye travels further. That can make a room feel more open. The effect isn’t guaranteed, though.
Very large tiles in a tiny room can backfire. You end up with awkward cuts along every wall. Those thin slivers look messy. In a small space, 600x600mm or 300x600mm usually balances well.
Layout also plays a part. Running tiles lengthwise down a narrow room can make it feel longer. Setting them across the room can make it feel wider. On site, we often dry lay a few tiles first. That quick test shows the cuts before anything gets stuck down.
Tile Sizes FAQs
What are the standard tile sizes in Australia?
There’s no single standard. The most common floor sizes are 300x600mm and 600x600mm. Walls often use 300x600mm and 100x300mm. Large formats like 600x1200mm are popular for open areas. Sizes vary slightly between brands, so check the actual dimensions before you order.
What is the size of 60×60 tiles?
A 60×60 tile measures 600mm by 600mm, or 60cm square. Each one covers about 0.36 square metres. Many rectified tiles measure slightly less, around 595mm, so the grout joints stay tight and neat. Check the box label for the exact size.
Are there standard tile sizes?
Not in the strict sense. Manufacturers choose their own formats, but the market has settled on a few popular ones. Those include 300x300mm, 300x600mm, 600x600mm and 600x1200mm. You’ll find them at most suppliers, so they’re easy to match and replace later.
How many types of tile sizes are there?
Most suppliers group tiles into three types: small, medium, and large. Small covers mosaics and subway tiles. Medium runs from 300x300mm to 600x600mm. Large starts at about 600x1200mm. Beyond those, you’ll find plank tiles and big slabs in some ranges.